- All information on this website is provided for reference only.
- Stirlings Performance Steels has made reasonable efforts to ensure that information provided on Stirlings Australia's website on the internet is accurate at the time of inclusion. However, there may be inadvertent and occasional errors for which Stirlings Australia apologises.
- Stirlings Australia makes no representations or warranties of any kind about the information provided on its website or via hypertext links or any other item used either directly or indirectly from Stirlings Australia's website and reserves the right to make changes and corrections at any time, without notice. By accessing this website, you agree that Stirlings Australia will not be liable for any inaccuracies or omissions or any direct, special, indirect or consequential damages or losses, or any other damages or losses of whatsoever kind resulting from whatever cause through the use of any information obtained either directly or indirectly from or through Stirlings Australia's website and any decisions based on such information are the sole responsibility of the visitor.
- Our Website includes registered trademarks that are protected by law
- Stirlings Australia cannot guarantee that its website is free from viruses or other conditions which may be detrimental to your software or hardware applications. The use of its website is at your own discretion and responsibility.
- Stirlings Australia will not knowingly send you electronic messages or spam
- The above exclusions and limitations apply only to the extent permitted by law.
- All $ values refer to Australian (AUD) dollars unless stated otherwise.
- This website contains links to information hosted on other Internet sites, which are maintained by third parties. Stirlings Australia is not responsible for any content that is being provided by others
-
Shop by Category
Sale
-
Pipe
-
Seamless
- 2205 Schedule 10S
- 2205 Schedule 40S
- 2205 Schedule 80S
- 2507 Schedule 10S
- 2507 Schedule 40S
- 2507 Schedule 40S (6.5M)
- 2507 Schedule 80S
- 253MA Schedule 40S
- 253MA Schedule 80S
- 304/L Schedule 10S
- 304/L Schedule 160S
- 304/L Schedule 40S
- 304/L Schedule 80S
- 310 Schedule 40S
- 316/L Schedule 10S
- 316/L Schedule 160S
- 316/L Schedule 40S
- 316/L Schedule 80S
- 321 Schedule 10S
- 321 Schedule 40S
- 904L Schedule 40S
-
Welded
- 2205 Schedule 10S
- 2205 Schedule 40S
- 2507 Schedule 40S
- 304/L Schedule 10S
- 304/L Schedule 40S
- 304/L Schedule 5S
- 316/L Schedule 10S (2m)
- 316/L Schedule 10S (6m)
- 316/L Schedule 10S WaterMark (6m)
- 316/L Schedule 20 (6m)
- 316/L Schedule 40S (2m)
- 316/L Schedule 40S (6m)
- 316/L Schedule 5S (6m)
- S30815 Schedule 40S (Random Length)
-
Seamless
-
Pipe Fittings
- Camlock
- Swage PBE
-
Pipe Fittings Seamless
-
Pipe Fittings Welded
- Pipe Screwed Fittings BSP
- Pipe Screwed Fittings BSP (High Pressure)
- Pipe Screwed Fittings NPT
-
Pipe Screwed Fittings NPT (High Pressure)
- 45 Deg Elbow 304
- 45 Deg Elbow 316
- 90 Deg Elbow 2205
- 90 Deg Elbow 304
- 90 Deg Elbow 316
- Bush 2205
- Bush 304
- Bush 316
- Coupling 304
- Coupling 316
- Hex Cap 304
- Hex Cap 316
- Hex Plug 304
- Hex Plug 316
- Nipple 304
- Nipple 316
- Nipple Reducer 304
- Nipple Reducer 316
- Reduced Coupling
- Reducing Tee 2205
- Reducing Tee 304
- Reducing Tee 316
- Round Cap
- Tee 2205
- Tee 304
- Tee 316
- Union 304
- Union 316
- Pipe Socket Weld Fittings
- Pipe Outlet Fittings
-
Tube
-
Tube Fittings
-
Flanges
-
ANSI
-
150LB
- 150LB 2205 Blind
- 150LB 2507 Blind
- 150LB 304 Blind
- 150LB 304 WNRF 80S
- 150LB 316 Blind
- 150LB 316 Tube SORF
- 150LB 2205 SORF
- 150LB 2507 SORF
- 150LB 304 SORF
- 150LB 316 SORF
- 150LB 2205 WNRF 10S
- 150LB 2205 WNRF 40S
- 150LB 2205 WNRF 80S
- 150LB 2507 WNRF 40S
- 150LB 304 WNRF 10S
- 150LB 304 WNRF 40S
- 150LB 316 WNRF 10S
- 150LB 316 WNRF 40S
- 150LB 316 WNRF 80S
- 150LB 316 Bossed Blind
- 150LB 316 SW 40S
- 150LB 316 SW 80S
- BSP Threaded Flange
- NPT Threaded Flange
- 300LB
- 600LB
- 900LB
- 1500LB
-
150LB
- Metric Flange AS 4087
-
Metric Flange EN 1092
- PN 10/16/25/40 Blind - EN 1092 (up to 40DN)
- PN 10/16 Blind - EN 1092 (50DN to 150DN)
- PN 10/16/25/40 Slip On - EN 1092 (up to 50DN)
- PN 10/16 Slip On - EN 1092 (65DN to 150DN)
- PN 25/40 Slip On - EN 1092 (65DN to 150DN)
- PN 16 Slip On - EN 1092 (Above 150DN)
- PN 25 Slip On - EN 1092 (Above 150DN)
- PN 40 Slip On - EN 1092 (Above 150DN)
- Table D
- Table E
- Table H
-
ANSI
-
Bar
- Sheet, Plate & Mesh
-
Valves & Hygienic Fittings
- Manways
- Copper Nickel
- PressFit
- Balustrade Fittings
- Wire, Fasteners, Marine & Hardware
-
Pipe